Skip to main content

Custom PCB Design by industry

Every sector breaks hardware differently. These are industry-specific takes on Custom PCB Design — each tied to the standards, environments, and field failures that define the sector. See also the main Custom PCB Design service.

Agriculture

Custom PCB Design for Agriculture Field Hardware

GizanTech designs ruggedized agricultural PCBs that survive dew, UV, fertilizer fog and ESD — conformal coating, sealed connectors, IP-rated enclosures.

Cold Chain

Custom PCB Design for Cold Chain & Freezer Hardware

PCB design for cold chain loggers and reefer controllers rated to -40C: derating, conformal coat against condensation, and battery low-temp behavior.

Energy & Solar

Custom PCB Design for Energy & Solar Power Systems

GizanTech designs high-voltage solar and energy PCBs that survive DC-bus creepage, MPPT thermals, surge events, and isolation faults in the field.

EV Charging

Custom PCB Design for EV Charging Control Boards

IEC 61851-compliant PCB design for EV charging control boards: CP/PP front-ends, contactor drive, isolation, and surge protection that survive the field.

Logistics & Asset Tracking

Custom PCB Design for Logistics & Asset Tracking

GizanTech designs compact GPS, cellular and BLE tracker PCBs that hold a fix and run for years on one battery, with antenna keep-outs and leakage paths nailed.

Manufacturing & Automation

Custom PCB Design for Manufacturing & Automation

GizanTech designs rugged industrial-I/O PCBs for the plant floor: isolated inputs, relay drive, 24V tolerance, and IEC 61000-4 surge/EMC survival.

Medical Devices

Custom PCB Design for Medical Devices

IPC Class 3 PCB design for medical devices: ISO 13485 traceability, IEC 60601 patient isolation, biocompatible connectors, audit-ready DFM.

Smart Buildings

Custom PCB Design for Smart Buildings

GizanTech designs low-voltage sensor and controller PCBs for smart buildings: PoE power, BACnet/RS485, EMC-clean closets, and protected field wiring.

Water Utilities

Custom PCB Design for Water Utilities

Submersible, IP68-sealed PCB design for water utilities: potting, pressure-rated enclosures, isolated sensor front-ends, and ground-loop-free metering boards.